Welcome to the The Hampshire Jap Car Club.
Results 1 to 3 of 3
  1. #1
    HJC Paid Member
    Join Date
    Jan 2009
    Location
    Hook, NE Hampshire
    Name
    Nick
    Posts
    1,591

    Default Update 23/08/10: Caliper refurb

    As im trying to save money for my impending engine work, and knowing how shite my brakes are, i decided to complete an overhaul of the stock 4 pot sumitomo calipers.

    I purchased the seal kit from Bigg Red as well as a new set of pistons for a grand total of 104.





    I removed the calipers and brought them inside for inspection




    The pistons were seized solid, couldnt even rotate them with a set of mole grips. So i hooked them back up to the brake lines and popped them 90% with the brake pedal





    As you can see, they arent in great condition, with lots of rust on the pistons themselves. I then removed the pistons to inspect the insides of the cylinders.




    Then using a very fine cross head screw driver, i removed the old inner seals



    The inner side of the cylinder was in pretty good nick, but as you can see, beyond the seal is rusted up, and no doubt the cause of the sticking pistons.

    I rubbed down the rusty parts with a combo of 1200 wet and dry and wire wool. Unfortunatly, once the rust was removed, there was some pitting in the metal evident. I decided not to rub down till all the pitting was gone as i didnt want any lateral movement in the pistons once they were fully extended.

    Rubbed down and as it was:


    I then lubricated the new inner seal in brake fluid and fitted the seal





    I then took the new piston and lubricated it with brake fluid and fitted the dust seal ready for installation




    I repeated for the other three pistons leaving




    Then all i had to do was fit the circlips for the dust seals, and whalaa, finished




    Ill fit them at a later date as i may be fitting braided lines aswell.

  2. #2
    Club Administrator
    Join Date
    Feb 2007
    Location
    Probably buying bit's for my GTR then shelving them
    Name
    Dave
    Posts
    23,344

    Default

    New thread created and stickied - great write up Nick

  3. #3
    HJC Non Paid Member
    Join Date
    May 2010
    Location
    Camberley
    Name
    jason
    Posts
    3,013

    Default

    good work ive done this on a budget of 0.00 lol reused everything just cleaned it all and refitted was a pig to do noing you cant brake anything. well done

 

 

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Similar Threads

  1. Caliper paint?
    By Revo in forum Technical
    Replies: 37
    Last Post: 22-03-2012, 11:16 PM
  2. Alloy refurb guide
    By 99mrbe in forum Technical
    Replies: 6
    Last Post: 16-09-2011, 09:17 AM
  3. As i'm not mechanically minded (basically useless)
    By Karlos in forum General Chat
    Replies: 13
    Last Post: 16-08-2011, 12:09 AM
  4. Brake Caliper refurb companies
    By nickz32 in forum General Chat
    Replies: 2
    Last Post: 19-08-2010, 12:33 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Logout